|
Low-Profile Lifeguard
Stand
 
This Low-Profile Lifeguard Stand is both versatile and
accessible. It is aesthetically pleasing and designed for use
where permanent installation is not desired.
* 30" Low Profile Life Guard Stand means 30" High from deck
to bottom of seat. *
* 42" Low Profile Life Guard Stand means 42" High from deck to bottom of seat. *
Easy to Assemble, Consists of (3) Main Components:
Frame
The frame of the stand is of polished, 1.9-inch (46.3mm) Outer Diameter, 065-inch
(1.7mm) wall thickness 304 stainless steel. Bends are (nominally) on a 6-inch (152.4mm)
radius. The interlocking sections are joined together to form the frame proper, its five
legs and the platform support. The deck below the free-standing lifeguard stand is
protected by rubber bumpers (included), which are inserted into each leg.
Observation Platform (Footboard)
The observation platform (footboard) of the Low Profile (Portable) Lifeguard
Stand measures 38 x 42 x 1.63-inch (965.2 x 1066.8 x 41.3mm) thick and is a solid
laminated fir core covered with fiberglass reinforced acrylic. The platform mounts to the
stand by heavy-duty stainless steel hardware. Safety Note: Observation Platforms are not
normally intended to serve as diving platforms.
Seat Assembly
The base column of the seat assembly is of 1.9-inch (48.3mm) 304 stainless steel
with 065-inch (1.7mm) stainless steel. At the lower end of the column is affixed a
.25-inch (6.4mm) carbon steel plate which serves as a mounting flange. This flange is
attached in tandem with the Observation Platform to the platform supports. A 1.9-inch
(48.3mm) bent stainless steel tube is affixed to the rear of the seat base column and
serves as an umbrella holder. At the upper end of the column is affixed a special swivel
mechanism to allow comfortable (approximately) 45º rotation of the contoured, low-side
fiberglass seat.
30-inch Low Profile LifeGuard Stand" means 30" High from deck
to bottom of seat.
42-inch Low Profile LifeGuard Stand" means 42" High from deck to bottom of seat.
54-inch Low Profile LifeGuard Stand" means
54" High from deck to bottom of seat.
| Part # |
Description |
Price |
Buy it Here |
| LGStand-LP30 |
Portable
Lifeguard Stand, 30" Low Profile w/ Umbrella Holder |
2495.00 |
 |
| LGStand-LP42 |
Portable
Lifeguard Stand, 42" Low Profile w/ Umbrella Holder |
2650.00 |
|
| LGStand-LP54 |
Portable
Lifeguard Stand, 54" Low Profile w/ Umbrella Holder |
2775.00 |
|
This is a short lifeguard chair with a spacious platform and
umbrella support. It is intended for use at temporary, semi-permanent and permanent sites.
Depending upon installation design local codes and site requirements, this model is
generally suitable for use on both commercial and competition pools.
In addition, these stands may also have applications at water slides, amusement and water
parks and at sporting sites as judges' stands or at other sites where portability is
required or where permanent installation is not desired. The units are also commonly seen
on elevated observation points and towers not connected with water recreation activities.
 Some (Most) Items on
this Page ship via Common Carrier (Not UPS). Call ahead for Freight Quote.
Back to Lifegaurd Stands and Chairs
Back to Deck Equipment
Back to Parrish Pools USA Commercial Pool Catalog
| 