Portable Lifeguard Stand
This is a moderate to tall lifeguard chair with an
extended observation platform and umbrella support. It is intended for use at
temporary semi-permanent and permanent sites. Depending upon installation design,
local codes and site requirements, this model is generally suitable for use on both
commercial and competition pools. In addition, these stands are very well suited for
use as judging and observation stands on tennis courts and at other sporting sites,
especially those where permanent installation is not desired.
The uprights of the stand mount to three polished, 1.9 inch
Diameter, .065inch wall thickness 304 stainless steel tubes which have been welded
together to form a base. The front and rear base sections are fitted with a total of
four FC-100c 10 inch long Fulcrum Covers which both add stability and absorb shock.
The rear base section is fitted with wheels on either side to facilitate
movement of the stand. The uprights of the stand are manufactured of polished, 1.9
inch Outer Diameter, .065 inch wall thickness 304 stainless steel with bends formed on
6inch radii. A total of three (3) 304 stainless steel polished Elite Treads
mount not he front of either upright section at 15 angles for ease in mounting. Each
step is 3inch in width and 20inch in length at the rail centerline. Strategic bends
of the heavy-duty stainless steel provide the tread's unmatched strength.
Contrasting beauty, sure-footing and secure mounting of the Elite Tread to the frame
section is enhanced by a replaceable, black non-skid, Cool-Touch tread insert at the top
and caps at either end of the tread. Placement of the stand is determined by the
installation design and local codes.
The observation platform (foot board) of the Portable Lifeguard Stand measures
18" x 42" x1.63"-inch thick and is solid laminated fir core covered with
fiberglass reinforced acrylic. The platform mounts to the stand uprights and is
supported by polished 1 inch Outer Diameter, .065inch wall thickness 304 stainless steel
tubes. Safety Note: Observation Platforms are not normally intended to serve as
diving boards platforms.
The base column of the seat assembly is of 1.9 inch 304 stainless steel.
At the lover end of the column is affixed a .25 inch carbon steel plate which
serves as a mounting flange. This flange is attached in tandem with the Observation
Platform to the platform supports. A 1.90" bent stainless steel tube is
affixed to the rear of the seat base column and serves as an umbrella holder. At the
upper end of the column is affixed a special swivel mechanism to allow comfortable
(approximately) 45 degree rotation of the contoured, low-side fiberglass seat.
Order it Here
LifeGuard Stand, Portable w/ Umbrella Holder
Some (Most) Items on
this Page ship via Common Carrier (Not UPS). Call ahead for Freight Quote.
Back to Life Guard Chairs
Back to Parrish Pools USA